9-2-4
PINION
CLUTCH
Inspection of the Pinion Clutch
Rotate the pinion manually. While rotating
it
in
the
direction of normal operation, smoothly reverse the
direction
of
rotation to confirm that
it
locks.
In
the event
of
any irregularity, replace it.
9-3
REASSEMBLY
Fig.
58
Reassembly
is
in
the
reverse order of disassembly, however, please note the following points.
The Places to Apply Grease:
The sliding surfaces of the pinion
and
the shaft’s spline.
The metals holding the shaft at the front
and
rear covers.
-
41
-
To Next Page
Loading...
Need help?
General
