Robin RGD500 - 10-3 Step 4: Pipe Frame Disassembly

Pan to remove
Control Box
Pipe Frame
t
Description Remarks
(4) Remove the control box from the frame.
64Washer..
....... 3pcs.
64bolt..
......... 3pcs.
Fig. 10-9
(1) Remove side plate A.
69 bolt ........... 2 pcs.
Remove the mount rubbers from side
plate.
(2) Remove the nuts and bolts that fasten
the generatar and frame together.
1. Remove the two bolts which fur the
alternator
to the generator base.
2. Remove the four bolts and flange
nuts
which fuc the engine to the
engine base.
8@ bolt ........... 4 pcs.
84
flange nut ....... 4 pa.
Nuts are welded to
the generator base.
Nexesarytwl
10 mm spanner or
box spanner
12 mm spanner or
box spanner
80 FLANGE NUT.. 4 pa.
RUBBER V.I. ...
ENGINE BASE
SIDE PLATE A
..... -2 pa.
2 pa.
4 DQ.
80 BOLT ..... -4 pes. Fig. 70-70
- 33-