10.
DISASSEMBLY AND ASSEMBLY
10-1
PREPARATION
and
PRECAUTIONS
1)
Be sure
to
memorize the location of individual parts when disassembling the generator
so
that the
generator can be reassembled correctly. Tag the disassembled part with the necessary information to
facilitate easier and smoother reassembly.
2)
For more convenience,divide
the
parts into several groups and store them in boxes.
3)
To
prevent bolts and nuts from being misplaced or installed incorrectly, replace them temporarily to
their original position.
4)
Handle disassembled parts with care; clean them before reassembly using a neutral cleaning fluid.
5)
Use all disassembly/assembly tools properly, and use the proper tool for each specific job.
10-2
SPECIAL
TOOLS
for
DISASSEMBLY
and
ASSEMBLY
ROTOR PULLER REAR
COVER
PULLER
JIG
-
29-
To Next Page
Loading...
Need help?
General
