Robland XSD310 - Types of Tools

Types of tools
Cutter blocks and toolholders with interchangeable knives are frequently used when moulding.
The cutter blocks can be made in 1 piece, the cutting part being fitted in a body of hard steel,
mostly chromium steel
The toolholders consist of the part on which the knives are fitted mecanically. Their cutting
part is made out of hardmetal (HSS) or calcium- carbide (K), as is the case for the cutter blocks.
Circular saw
The use of saw blades in hardmetal (HSS) is strictly forbidden. Always use carbide-tipped (K)
saw blades.
Planer-thicknesser
The most frequently used planer knives are carbide (K) or hardmetal blades (HSS).
Mortiser
Only use "left" drills on the mortiser. To avoid vibrations short drills should be used as often as
possible.
IMPORTANT : for each tool and for each diameter, the correct speed must be chosen.
Please check the INRS sticker on the machine.
10