Robustel GoRugged M1000 User Manual

Robustel GoRugged M1000 User Guide
RT_UG_M1000 Standard_v.2.0.0 20.12.2013 22 / 83
Confidential
Settings->Export
Export the Modem’s current configuration file to your local
PC.
Settings->Import
Import the Modem’s configuration file from local PC to the
Modem.
Help->Help
Show some notices about this configurator.
Help->About
Manufacturer’s information and Modem Configuratior
version.
Port No.
Select the local RS-232 port to communicate with the
Modem.
Connect
Connect the Modem Configurator to the Modem.
Disconnect
Disconnect the Modem Configurator to the Modem, and
release the PC’s RS-232 port.
Read
Read Modem’s current settings.
Write
Save changes into Modem.
Note: Reboot for changes to take effect.
Default
Set Modem to default factory settings.
Reboot
Reboot the Modem.
Exit
Exit the Modem Configurator.
Disconnecting
Modem is not communicating with Modem Configurator.
Connecting
Modem is communicating with Modem Configurator.
Serial Management Settings
Show current RS232 communication parameter.
Version
Show current software and hardware version of Modem.

Robustel GoRugged M1000 Specifications

General

Brand	Robustel
Model	GoRugged M1000
Category	Modem
Language	English