씰 Apply one drop of the selected control solution to the test pad
of the strip.
씰 Your Accu-Chek Active meter beeps briefly to acknowledge
application of solution and to announce the start of testing.
씰 After 5 seconds a second beep tone indicates that testing is
complete, and the result appears in the display. If you have not
already flagged this quality control result, you may do so now.
The value displayed here is an example. The result shown on
your Accu-Chek Active meter will not necessarily agree.
91
man_04493168001_02_EnUK.indd 91 1/12/2006, 11:29:14 ðì
To Next Page
Loading...
