Roche Accu-Chek Guide - Setting Blood Glucose Target Ranges

26
Meter Settings
5
Time/Date
1
Turn the meter on by
briefly pressing
. From
Main Menu, press
to
highlight Settings. Press
.
2
Time/Date is highlighted.
Press
.
3
Press or to adjust
each field. Press
to set
and proceed to the next
field. Set am or pm if
necessary.
Press
to save and return to the previous
menu.
Beeper
The beeper prompts you:
• when a test strip is inserted.
• to apply blood or control solution to the
test strip.
• when enough blood or control solution is
drawn into the test strip.
• when the blood glucose or control test is
complete.
• when the meter is turned on.
• when a button is pressed.
• when it is time to perform a test (if
Reminders or Post Meal reminders are On).
• when the batteries are inserted.
• when there are no stored blood glucose
results or there is an invalid record in the
logbook.
• when there are no errors in the error log.
• if an error occurred (even if the beeper is
o, it still beeps for an error).
1
Turn the meter on by
briefly pressing
. From
Main Menu, press
to
highlight Settings. Press
.
Setting Options Function
Last Result On / O Select whether the previous blood glucose result
(within the past 24 hours) appears with the
current blood glucose result.
On – the previous blood glucose result appears
with the current blood glucose result.
O – only the current blood glucose result
appears.
Language Select the language for the meter.
82052_08100918004.indd 26 6/9/2020 12:07:16 PM