Roche Accu-Chek Guide - Meter Settings Overview; Configuring Time, Date, and Beeper

25
Meter Settings
5
Overview
You can adjust the following settings in the meter for your personal preferences. Refer to the
sections later in this chapter for details and how to set the options.
Setting Options Function
Time/Date Time / Date Set the time and date.
Beeper On / O Select On or O.
Wireless
Select wireless communication settings. See the chapter Wireless
Communication and Meter Pairing.
Target
Ranges
O / Single Range /
2 Ranges
Select the blood glucose target range appropriate
for you.
NOTE
Consult your healthcare professional for the
appropriate target range for you.
O – no target range arrow symbols appear with
the blood glucose result. Patterns is O (see the
Patterns section of this chapter for details).
70–160 mg/dL
(pre-set target range)
Single Range – blood glucose results are marked
as above, within, or below range based on the
single target range set in the meter.
Before Meal Range
70–110 mg/dL
(pre-set target range)
After Meal Range
70–160 mg/dL
(pre-set target range)
2 Ranges – set Before Meal and After Meal
ranges. Blood glucose results are marked as
above, within, or below range based on the 2
target ranges (Before Meal and After Meal) set in
the meter.
Patterns On / O On – a pattern is detected when 2 below-target
or 3 above-target results with the same comment
are detected within a 7-day period.
Reminders On / O / Edit time On – set up to 4 reminders per day to remind you
to test.
Post Meal On / O / Edit time On – reminds you to perform an after meal blood
glucose test.
82052_08100918004.indd 25 6/9/2020 12:07:15 PM