45
Wireless Communication and Meter Pairing
7
Press or to
highlight Pair Device.
Press
.
If there are less than
5 paired devices:
Pair Device appears. Proceed to Step 5.
If there are already
5 paired devices:
Maximum paired
devices appears. You
must delete a paired
device before you can proceed to Step 5.
Press
or to highlight Yes. Press .
Press or to
highlight the device to
delete. Press
. Proceed
to Step 5.
Prepare the other device for pairing. Refer
to the other device’s instructions for
information about pairing.
The meter displays its
code.
The mobile device displays a list of found
devices, including the meter. Select the
meter from the list. When prompted, enter
the code displayed on the meter from
Step 6 into the device to be paired.
When pairing is complete,
and the name of the
paired device appear.
Press
.
If there is more than
1 paired device, the
meter asks if you want
the new device to be the
default device. Press
or
to highlight No or Yes. Press to
set the option and return to Pairing.
Press
to return to the previous menu.
Delete Pairing
This procedure is to delete a paired device
(assumes there is at least 1 paired device).
You can pair 5 devices. If you have 5 paired
devices, you must delete a pairing before you
pair to another device.
The device you choose remains the default
until you change it.
1
Turn the meter on by
briefly pressing
. From
Main Menu, press
to
highlight Settings. Press
.
82052_08100918004.indd 45 6/9/2020 12:08:21 PM
To Next Page
Loading...
