Roche CoaguChek Vantus - Page 31

31
The meter now displays the screen for setting
the time format.
5 Use the up/down arrows button
to
select the time format for the display
(24 hour or 12 hour am/pm). The newly
selected format is highlighted (blue).
6 Press the Enter button
to conrm the
selection, which is now indicated by the
green dot.
7 Press the Enter button
again to save the
setting. The screen for setting the time and
date follows next.
All test results are saved together with time
and date. Analyzing stored test results or
using reminders will only work with time
and date correctly set. Always check (and,
if necessary adjust) the time and date after
replacing the batteries.
Throughout this manual the 24hr format is
used on example screens.
Time & Date
24 hr Format
12 hr Format
Next
Time & Date
13
17Sep
Next
45:
2018
Time & Date
PM
01
17Sep
Next
45:
2018
Starting Up
CoaguChek Vantus User’s Manual, version 1.0