85
Meter settings
The initial meter setup was completed after
you powered on the meter for the rst time.
Use the following descriptions to set options
that are not covered by the initial setup (e.g.,
the target range) or to edit settings already
made.
Always perform the following two steps
before selecting one of the options in the
Settings menu:
1 Power the meter on by pressing the Enter
button
. Wait until the Main Menu is
displayed.
2 Select Settings and press the Enter
button
to open the corresponding
menu.
Main Menu
Test
Settings
Reminders
My Results
Other
05:03 PM 17 Sep 2018
Settings
Beeper Volume
Set Targets
Result Format
Language
Time & Date
Display Brightness
Reminders and Meter Settings
CoaguChek Vantus User’s Manual, version 1.0
To Next Page
Loading...
