Roche CoaguChek Vantus - Performing a Test

42
Performing a test
1 Wash your hands with soap and warm
water. Dry them thoroughly.
WARNING
Residues of water on the skin can dilute the
drop of blood and produce false results.
2 Place the meter on a level, vibration-free
surface or hold it in your hand so that it is
roughly horizontal.
3 Power the meter on by pressing the Enter
button
. Alternatively, you can insert a
test strip to power it on, which will put
the meter – after startup – into test mode
directly.
Testing a Capillary Blood Sample
CoaguChek Vantus User’s Manual, version 1.0