Roche CoaguChek Vantus - Displaying a Target Report

62
Displaying a Target report
The Target report is only available if you have
set and enabled an INR target range (see “Set
Targets” on page 92).
1 Power the meter on by pressing the Enter
button
. Wait until the Main Menu is
displayed.
2 Use the up/down arrows button
to
select My Results.
3 Press the Enter button
to open the My
Results menu.
4 Select Target and press the Enter button
to display the report.
Main Menu
Test
Settings
Reminders
My Results
Other
Sep
05:03 PM 17 Sep 2018
My Results
Review Results
Trend
Target
Transfer Data
Reports
Target
Table
Text
90 Days
Average: 2.5 INR
Below
Above
Within
Reviewing and Handling Data
CoaguChek Vantus User’s Manual, version 1.0