Roche CoaguChek Vantus - Button Click

97
Button Click
The meter can be set to emit a click sound
whenever you press a button.
To set the button click:
1 Select Button Click and press the Enter
button
to open the corresponding
menu.
The current status is indicated by a green dot
on the right.
2 Use the up/down arrows button
to
select On or Off.
3 Press the Enter button
to conrm the
selection, which is now indicated by the
green dot.
4 Press the Enter button
again to save the
selected status.
The setting of the beeper volume also applies
to the button click. If the beeper volume is set
to Off, the button click will also be muted.
Settings
Beeper Volume
Set Targets
Result Format
Display Brightness
Button Click
Data Transfer
Button Click
Text
Off
On
Save
Reminders and Meter Settings
CoaguChek Vantus User’s Manual, version 1.0