Roche CoaguChek Vantus - Time & Date

89
Time & Date
1 Select Time & Date and press the Enter
button
to open the corresponding
menu.
2 Use the up/down arrows button
to
select the time format for the display (24
hour or 12 hour am/pm).
3 Press the Enter button
to conrm and
save the setting. The screen for setting the
time and date follows next.
4 Use the up/down arrows button
to set
the current hour.
5 Press the Enter button
to conrm the
hour. The next input eld (minutes) will be
highlighted.
6 Proceed with setting the remaining elds
(year, month, day). The Enter button
always conrms a setting (and highlights
the subsequent eld, if available). The
Back button
allows you to jump back to
the previous eld.
Settings
Beeper Volume
Set Targets
Result Format
Language
Time & Date
Display Brightness
Time & Date
24 hr Format
12 hr Format
Next
Time & Date
PM
01
17Sep
Next
45:
2018
Time & Date
PM
01
17Sep
Next
45:
2018
Reminders and Meter Settings
CoaguChek Vantus User’s Manual, version 1.0