48
A beep tone indicates that you have applied
enough blood (if you have activated the
beeper function). The blood drop symbol
disappears and the test starts.
Do not add more blood. Do not touch the
test strip until the result is displayed.
The meter now performs an automatic quality
control check on the test strip. Following a
successful outcome of the quality control
check, the coagulation measurement starts.
The circular progress bar spins until the meter
has determined the result.
Test
Apply blood
Test
Blood applied
Automated quality check...
Test
Blood applied
Quality check complete
Test
Measuring...
Testing a Capillary Blood Sample
CoaguChek Vantus User’s Manual, version 1.0
To Next Page
Loading...
