70
5 Connect the meter to the computer via
USB cable.
The display shows “Connected” when the
connection has been established.
6 Open a window on your computer that
displays the contents of the meter (as a
removable disk drive).
7 Double click on START.HTM to open the
le in your standard Internet browser.
8 After you have nished using the
embedded reports, unplug the USB cable
from the meter and the computer.
When the meter is connected to a computer,
it will not be powered via the USB cable
and will not power off automatically. To save
battery power always remove the USB cable
when the connection is no longer in use.
Reports
Connected
Reviewing and Handling Data
CoaguChek Vantus User’s Manual, version 1.0
To Next Page
Loading...
