Roche CoaguChek Vantus - Page 93

93
The current activation status is indicated by a
green dot on the right.
A newly set or edited target range is only
valid for tests performed after this setting
is made, and will not affect test results
already stored in memory.
5 Use the up/down arrows button
to
select On or Off.
6 Press the Enter button
to conrm the
selection, which is now indicated by the
green dot.
7 Press the Enter button
again to proceed
to the next step.
Set Targets
On
Off
Next
Reminders and Meter Settings
CoaguChek Vantus User’s Manual, version 1.0