56
Operating the Replifex
™
Step 5
Press the STORE button on the Replifex
™
to initiate the data dump. As the Replifex
™
per-
forms the dump, it will display "XXX DUMPED" - where "XXX" = the number of the data
string currently transmitting (i.e. strings 1-254 are presets, titles, controller information and 2-
tap delay information; string 255 contains program mapping information; and string 256
contains miscellaneous information. Contact Rocktron Corporation for information on how to
receive a detailed MIDI spec).
XXX DUMPED
TRANSMITTING REPLIFEX
Step 6
After the Replifex
™
displays "TRANS COMPLETE", stop the sequencer. The sequencer should
have recorded all of the data that was dumped from the Replifex
™
. Keep this data stored on a disk
in a safe place. Turn the PARAMETER SELECT control to continue.
STOP
To Next Page
Loading...
