126 Rockwell Automation Publication 1766-UM001O-EN-P - September 2021
Chapter 6 Real-Time Clock and Memory Modules
Program /Data Upload
To upload the program and data from the controller’s memory to a memory
module, on the “Comms” menu in your RSLogix 500/RSLogix Micro
programming software, point “EEPROM” and then click “Store to EEPROM”.
With MicroLogix 1400, you can also use the LCD and the LCD buttons on the module to
transfer applications to or from the controller.
For more information on program/data download, see your RSLogix 500/RSLogix Micro
programming software documentation.
With MicroLogix 1400, you can also use the LCD and the LCD buttons on the module to
transfer applications to or from the controller.
For more information on program/data upload, see your RSLogix 500/RSLogix Micro
programming software documentation.
To Next Page
Loading...
Need help?
General
