Rockwell Automation 1769-L23E-QB1B - Minimum Spacing Requirements

12 CompactLogix Packaged Controllers
Publication 1769-IN082A-EN-P - July 2008
6. Align the tongue-and-groove slots of the end cap with those on the right of
the packaged controller or expansion module.
7. Close the locking tab located on the top of the end cap.
Minimum Spacing Requirements
When using any of the CompactLogix packaged controllers, maintain spacing from
enclosure walls, wireways, and adjacent equipment. Allow 50 mm (1.97 in.) of
space on all sides, as shown. This provides ventilation and electrical isolation.
CompactLogix L23
OK
BATT
I/O
DCH 0
FORCE
RUN
50 mm
(1.97 in)
50 mm
(1.97 in)
50 mm
(1.97 in)
50 mm
(1.97 in)