CompactLogix Packaged Controllers 7
Publication 1769-IN082A-EN-P - July 2008
Installation Checklist
This table lists tasks that must be completed to fully install and begin using your
packaged controller.
9
Installation Tasks
Install the Battery
Connect Expansion Modules (optional)
Panel Mount the System or DIN-rail Mount the System
Minimum Spacing Requirements
Grounding Considerations
Wire the I/O Removable Terminal Blocks
Connect Using the RS-232 Connection
Download and Install EDS Files
Download and Install Controller Firmware
Use the AutoFlash Feature of RSLogix 5000 to Load Firmware
or Use the ControlFlash Utility to Load Firmware
To Next Page
Loading...
Need help?
General
