278 Rockwell Automation Publication 2080-UM002N-EN-E - November 2022
Appendix B Quickstarts
1. On the Device Details toolbar, click Secure. Select Change Password.
2. The Change Controller Password dialog appears. Enter Old Password, New Password
and confirm the new password.
3. Click OK.
The controller requires the new password to grant access to any new session.
Clear Password
With an authorized session, you can clear the password on a target controller through the
Connected Components Workbench software.
1. On the Device Details toolbar, click Secure. Select Clear Password.
2. The Clear Password dialog appears. Enter Password.
3. Click OK to clear the password.
The controller requires no password on any new session.
To Next Page
Loading...
