Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022 215
Chapter 7
4. On your PC, browse to and select the PanelView Plus 7 Performance
Series B terminal
(1)
.
5. Click Next.
6. Confirm that the information is correct, and then click Flash.
On the ControlFLASH Plus screen, the Status field displays the
Tra n s m itti n g u p d ate s tat u s .
(1) Series C if it is a Stainless Steel terminal
TIP The Device description states PanelView Plus 7 Performance, PVP7P DLR
Network Switch.
To Next Page
Loading...
