Rockwell Automation Allen-Bradley PanelView Plus Series User Manual

Publication 2711P-UM001D-EN-P - September 2005
Transfer files and Upgrade Firmware 7-7
2. Select Upgrade firmware on terminal and press OK.
3. Select Network connection and press Next.
Use the Ethernet and Serial connections only if the firmware
upgrade is unsuccessful.
4. Locate the terminal on your Ethernet network via its IP address.
Skip to Step 6 if you found the terminal. If you do not see the
terminal, right click on the Ethernet driver and add the device to
the browse tree.

Rockwell Automation Allen-Bradley PanelView Plus Series Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PanelView Plus Series
Category	Touch terminals
Language	English