Publication 2711P-UM001D-EN-P - September 2005
Configuration Mode 4-11
Baud Rate Data rate at which serial driver
communicates. The baud rate is
automatically configured if Use Auto Config
is set to Yes.
110, 300, 600, 1200, 4800
9600, 19200, 38400, 115200
Use Auto Config Automatically or manually configures the
baud rate, parity and error checking
parameters.
Yes (auto configure)
No (manual configure)
Com Port Communication port used on the terminal. 1 (COM1)
2 (COM2)
Field Description Valid Values
To Next Page
Loading...
