`
Where do you think the drive configuration data gets stored?
The drive configuration data for each node is actually stored in your Studio 5000 project (the .ACD file)! It also resides in
the ControlLogix when the .ACD is downloaded to the controller. This provides a convenient local resource for a node’s
configuration settings should the node need replacing. Just connect to the controller, open the drive’s AOP and download
the configuration!
16. Delete the copy of the drive profile. The drive you will delete on the E-Net tree is: PowerFlex 525-EENETPF525_Drive1
17. View the input tags on the drive that remains.
Double-click on the Controller Tags under the Controller folder and expand the PF525_Drive:I inputs.
It may be necessary to drag the “Name” column right margin in the header to view the full input tag names.
Descriptive tag names have been created for the configured I/O. The Drive Status bits (BOOLs) are clearly defined as well
as the Feedback and Input Datalink Output Current. Note that the proper data types are used for every tag.
Page 50 of 64
To Next Page
Loading...
Need help?
General