Rockwell Automation Allen-Bradley SMC-Flex 150

Wiring 3-27
Slow Speed with Braking Figure 3.26 shows the wiring for the Slow Speed with Braking option.
Figure 3.26 Typical Wiring Diagram for the Slow Speed with Braking with an
Isolation Contactor
➀
Customer supplied.
➁ Refer to the controller nameplate to verify the rating of the control power input voltage.
Note: Refer to Chapter 3 for typical power circuits.
11 12
13
14
15 16
17
18 19 20
21
23
24
25 26
27
28 29
30 31 32 33
22
34
Slow Speed
Stop
Start
Control Power
Brake
Alarm
Contact
Fault
Contact
Aux #2
Normal
Aux #1
Normal/Up-to-Speed/
Bypass
SMC-Flex
Control Terminals
IC
PTC
Input
TACH
Input
Ground
Fault
➀
➀
➀
➀
➀
➁