Rockwell Automation Logix 5000 Series - Page 23

Chapter 1 Store and Load a Project By Using a
Memory Card
Rockwell Automation Publication 1756-PM017J-EN-P - March 2022 23
A dialog box asks you to confirm the store operation.
5. Select Yes to store the project.
The table describes the events that occur for the memory card being
used.
If using
This happens during the store operation
CompactFlashCard • On the front of the controller, the OK status indicator displays the
following sequence: flashing green> solid red> solid green.
• Logix Designer application goes offline.
• A dialog box indicates the store is in progress.
SD Card • On the front of the controller, the SD and OK status indicators flash green.
• The Status Display shows
SAVE . See "Store a Project on page 14."
• Logix Designer application goes offline.
•
A dialog box tells you that the store operation is in progress.
6. Select OK.
When the store operation is finished, you remain offline.