Index-2
SP500 AC Drive Installation and Operation Manual Version 3.1
G
Grounding, 2-9 to 2-12, 5-11
H
Humidity, 3-1, A-1
I
IET reset, digital input, 5-5, 5-7
IGBT power devices, 2-2
checking, 9-7 to 9-8
Input, AC,
see
AC input
Input, digital,
see
Digital Input Wiring
Installation
checking with power off, 6-1 to 6-2
checking with power on, 6-2 to 6-3
completing, 6-1 to 6-3
disconnects, 4-6
output contactors, 4-7
planning, 3-1 to 3-10
requirements, 3-1
transformers, 4-6 to 4-7
J
Jumper (J6)
location of, 4-7 to 4-8
K
Key descriptions, 7-1 to 7-2
Keypad and display operation, 7-1 to 7-7
Kits
Option, 2-13
Snubber resistor braking, 2-13
L
Lead lengths, motor, 3-6 to 3-7, A-1
LED descriptions, 7-3
Line frequency, A-1
Line noise, avoiding, 4-6
M
Manual Torque Boost (F-06), 8-7
Maximum Speed (F-04), 8-6
Mechanical motor overload protection, 4-7
Membrane switch/bracket assembly, 2-9 to 2-12,
F-1 to F-2
Minimum Speed (F-03), 8-6
Model numbers, 2-6 to 2-8
Monitor mode, 7-5 to 7-6
Motor
motor lead lengths, 3-6 to 3-7, A-1
multiple motor applications, 3-10
overload protection, mechanical, 4-7
single motor applications, 3-9
Mounting dimensions, 3-2 to 3-3, A-1
Multi-Speed Presets 1, 2, 3 (F-23, F-24, F-25), 8-15
Multi-Speed presets, digital inputs, 5-6 to 5-7
N
NEMA enclosures, 2-8
O
Option kits,
see
Kits
Output
current, 2-7 to 2-8
power wiring, 3-4 to 3-7, 4-1 to 4-5, 4-7 to 4-8
status relay wiring, 5-10
P
Parameters
displaying or changing values, 8-1 to 8-2
factory settings and defaults, B-1 to B-2
listed alphabetically, C-1 to C-2
menu structure, 7-4
password protection, 8-3 to 8-4
record of user settings, B-1 to B-2
Parts, replacement, F-1 to F-2
Password Lockout Enable (F-20), 8-14
Password protection, 8-3 to 8-4
Percent Selected Speed Reference Display Enable
(F-13), 8-11
Planning
drive clearance, 3-4
location, 3-1
Power
loss, 2-7 to 2-8
ratings, 2-7 to 2-8
wire sizes, 3-4 to 3-5
Power Module
checking circuitry with power off, 6-1 to 6-2
verifying DC voltage, 9-1 to 9-2
To Next Page
Loading...
