Roger PRT12EM - Page 18

PRTxxEM series readers Operating Manual.doc 2018-08-21
18/54
102
Access denied
Access for the user (ID + name) has been denied
103
Access denied – Facility
Code
Access has been denied for card with valid Facility
Code
200
Reader armed
Reader has been switched to Armed mode by user (ID
+ name)
201
Reader disarmed
Reader has been switched to Disarmed mode by user
(ID + name)
104
Door unlocked
Door lock has been unlocked
105
Door relocked
Door lock has been re-locked
106
Door open
Door has been opened
107
Door closed
Door has been closed
108
Exit button
Input [22]: Exit Button has been triggered
202
Arming disabled
Arming has been disabled through input line [23]:
Arming Disabled
203
Arming enabled
Arming has been re-enabled through input line [23]:
Arming Disabled
204
Arming by input
Reader has been armed by input line [24]:
Arming/Disarming Key Switch
205
Disarming by input
Reader has been disarmed by input line [24]:
Arming/Disarming Key Switch
006
Summer time
Clock has been pushed backward by 1 hour
007
Winter time
Clock has been pushed forward by 1 hour
109
Door bell
Door bell indication triggered
300
Forced entry
Door opened in unauthorized way
304
Door ajar
Door open to long
301
Prealarm
Five consecutive attempts to enter wrong PIN or card
within 5 minutes – Prealarm signaling started
112
Unknown card
The unknown card has been entered (card code)
113
Unknown PIN
The unknown PIN has been entered (PIN code)
003
User Programming
Reader switched to User Programming mode
004
Installer Programming
Reader switched to Installer Programming mode
005
Online mode
Reader switched to online communication mode with PC
000
Reader restarted
Reader passed through initialization procedure (the
same as during power on)
001
Clock cleared
The internal clock of the reader has been cleared
002
Clock changed
The internal clock of the reader has been programmed
302
Tamper Alarm
Reader entered Tamper Alarm state
303
Intruder Alarm
Reader entered Intruder Alarm state