Roger PRT12EM - Page 43

PRTxxEM series readers Operating Manual.doc 2018-08-21
43/54
PRT64EM
Outdoor proximity reader with keypad, laser engraved long durability silicon
rubber keypad, two function keys, dark grey ABS enclosure, screw terminals, pig-
tail cable as option
PRT64EM-VP
Outdoor proximity reader with keypad, laser engraved long durability silicon
rubber keypad, two function keys, silver metal enclosure including key-tops, pig-
tail cable
PRT66EM
Outdoor proximity reader without keypad, dark gray ABS enclosure, screws
terminals, pig-tail cable as option
RM-2
Relay module with plastic box, two relays with single NO/NC contact 1.5A/24V
rated
RM-2-BRD
RM-2 electronic module (board) only
XM-2
Input/output addressable expander in plastic enclosure, digital communication
with reader, two NO/NC inputs and two relay outputs, each relay offers single
NO/NC contact 1.5A/24V rated
XM-2-BRD
XM-2 electronic module (board) only
PE-1
Plastic enclosure for XM-2/RM-2 modules
Product History
Electronic
module
Firmware
Date
Description
v1.0
fv1.20
11/12/07
The initial product version
v1.0
fv1.23
11/02/08
No change
v1.0
fv1.24
17/03/08
Time range for Door Unlock Time and Door Open
Timeout extended to 99 minutes. Programming functions
[51] and [52] removed and replaced by functions [71] and
[72]
v1.0
fv1.25
19/05/08
CLK line operation in Simple Standalone Mode corrected;
Door Bell indication on internal buzzer and output corrected
v1.0
Fv1.29
16/02/2010
Extended functions in standalone mode and EPSO protocol.
Adjustment of keypad backlight and buzzer loudness level
available.
v2.0
Fv 2.29
16/02/2010
Extended functions in standalone mode and EPSO protocol.
Adjustment of keypad backlight and buzzer loudness level
available.