Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
105Getting Started 1330.8073.02 ─ 03
The R&S FSV/A allows you to configure the display to suit your specific require-
ments and optimize analysis.
7.5.1 Activating and Deactivating Channels
When you activate an application, a new measurement channel is created which
determines the measurement settings for that application. The same application
can be activated with different measurement settings by creating several chan-
nels for the same application. Whenever you switch channels, the corresponding
measurement settings are restored. Each channel is displayed in a separate tab
on the screen.
An additional tab ("MultiView") provides an overview of all currently active chan-
nels at once.
Only one measurement can be performed at any time, namely the one in the cur-
rently active channel. However, in order to perform the configured measurements
consecutively, a Sequencer function is provided.
To start a new channel
1. Select the [Mode] key.
Displaying Results
To Next Page
Loading...
