Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
86Getting Started 1330.8073.02 ─ 03
Changing the Channel Name
The measurement channels are labeled with their default name. If that name
already exists, a sequential number is added. You can change the name of the
measurement channel by double-tapping the name in the channel bar and enter-
ing a new name.
Note: Channel name restrictions. Channel names can have a maximum of 31
characters, and must be compatible with the Windows conventions for file names.
In particular, they must not contain special characters such as ":", "*", "?".
7.1.2 Window Title Bar
Each channel in the R&S FSV/A display can contain several windows. Each win-
dow can display either a graph or a table as a result of the channel measurement.
Which type of result evaluation is displayed in which window is defined in the dis-
play configuration (see Chapter 7.5, "Displaying Results", on page 104). The win-
dow title bar indicates which type of evaluation is displayed.
Double-tap the window title bar to enlarge the window temporarily. Double-
tap it again to restore the original size.
See also Chapter 7.5.4, "Switching Between a Split and Maximized Window
Display", on page 112.
Trace Information in Window Title Bar
Information on the displayed traces is indicated in the window title bar.
2
1 3 4 5
(1) Trace color
Color of trace display in diagram
(2) Trace no.
Trace number (1 to 6)
(3) Detector
Selected detector:
AP AUTOPEAK detector
Pk MAX PEAK detector
Mi MIN PEAK detector
Sa SAMPLE detector
Understanding the Display Information
To Next Page
Loading...
