Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
28Getting Started 1330.8073.02 ─ 03
5. If necessary, change the screen resolution. Consider the information in the
note above.
6. Select the instrument to be used for display:
● "Display 1": internal monitor only
● "Display 2": external monitor only
● "Duplicate": both internal and external monitor
7. Tap "Apply" to try out the settings before they are accepted permanently, then
you can easily return to the previous settings, if necessary.
8. Select "OK" if the settings are suitable.
4.5 Setting Up a Network (LAN) Connection
A LAN connection is the prerequisite for all network operations. The LAN connec-
tion settings can be configured directly in the Windows operating system.
The R&S FSV/A is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). Provided the network administrator has
assigned you the appropriate rights and adapted the Windows firewall configura-
tion, you can use the interface, for example:
Setting Up a Network (LAN) Connection
To Next Page
Loading...
