Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
25Getting Started 1330.8073.02 ─ 03
All necessary system settings can be defined in the "Start > Settings" menu.
(For required settings refer to the Windows 10 documentation and to the hard-
ware description).
4.2.5 Accessing the Windows Taskbar
The Windows taskbar also provides quick access to commonly used programs,
for example Paint or WordPad. IECWIN, the auxiliary remote control tool provided
free of charge and installed by Rohde & Schwarz, is also available from the task-
bar.
For details on the IECWIN tool, see the "Network and Remote Control"
chapter of the R&S FSV/A user manual.
To open the taskbar, select the "Windows" icon on the R&S FSV/A toolbar,
or press the "Windows" key or the [CTRL + ESC] key combination on your
(external) keyboard.
4.3 Connecting USB Devices
The USB interfaces of the R&S FSV/A allow you to connect USB devices, such
as a mouse, directly to the instrument. Increase the number of possible connec-
tions using USB hubs. Due to the large number of available USB devices, there is
almost no limit to the expansions that are possible with the R&S FSV/A.
All USB devices can be connected to or disconnected from the instrument during
operation.
To connect a USB device
1. Connect the device to the USB interface of the R&S FSV/A.
The operating system automatically searches for a suitable device driver.
2. If Windows does not find a suitable driver:
a) If the driver software is on a CD, connect a USB CD-ROM drive to the
instrument.
b) Specify a directory that contains the driver software.
Connecting USB Devices
To Next Page
Loading...
