Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
24Getting Started 1330.8073.02 ─ 03
Adapting the automatic login function to a new password
If you change the "Instrument" user's password, which is used during automatic
login, this function no longer works. Adapt the settings for the command that acti-
vates the auto login function first.
1. Open the C:\R_S\INSTR\USER\NO_AUTOLOGIN.REG file in any text editor
(e.g. Notepad).
2. In the line "DefaultPassword"="894129", replace the default password
(894129) by the new password for automatic login.
3. Save the changes to the file.
Reactivating the automatic login function
1. Select the "Windows" icon in the toolbar to access the operating system of the
R&S FSV/A (see also Chapter 4.2.4, "Accessing the Start Menu",
on page 24).
2. In the "Start" menu, select "Run".
The "Run" dialog box is displayed.
3. Enter the command C:\R_S\INSTR\USER\AUTOLOGIN.REG.
4. Press the [ENTER] key to confirm.
This command reactivates automatic login function. It is active the next time
the instrument reboots.
4.2.4 Accessing the Start Menu
The Windows "Start" menu provides access to the Windows 10 functionality and
installed programs.
To open the "Start" menu:
► Select the "Windows" icon in the toolbar, or press the "Windows" key or the
[CTRL + ESC] key combination on the (external) keyboard.
Windows Operating System
To Next Page
Loading...
