Trying Out the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
69Getting Started 1330.8073.02 ─ 03
b) Tap the "Marker Config" softkey in the "Marker" menu.
c) Tap the "Search" tab in the "Marker" dialog box.
d) In the "Threshold" field, enter -68
dBm.
e) Tap the "State" box for "Threshold" to activate its use.
Only peaks that are larger than -68 dBm will be included in the peak list.
The marker peak list displays the determined peaks that are above the
defined threshold.
Figure 6-11: Marker Peak List
6.7 Zooming into the Display
To analyze the areas around the peak levels in more detail, we will zoom into the
top 3 peaks.
1.
Tap the "Multiple Zoom" icon in the toolbar.
The icon is highlighted orange to indicate that multiple zoom mode is active.
Zooming into the Display
To Next Page
Loading...
