Rohde & Schwarz FSVA3000 - Rear Panel View

Instrument Tour
R&S
®
FSVA3000/R&S
®
FSV3000
50Getting Started 1330.8073.02 ─ 03
Risk of instrument damage
Do not overload the input. For maximum allowed values, see the data
sheet. A DC input voltage (for AC coupling) of 50 V must never be excee-
ded. For DC coupling, DC input voltage is not allowed.
5.2 Rear Panel View
This figure shows the rear panel view of the R&S FSV/A. The individual elements
are described in more detail in the subsequent sections.
1
2 6
12
7
3 5
14
13
8 11
16 17
15
18
109
4
Figure 5-3: Rear panel view
1 = AC Power Supply Connection and Main Power Switch
2 = Display Port for external display (requires R&S FSV3-B114)
3 = DVI connector for external display
4 = LAN 1 connector
5+6 = USB (Device) connectors (device connector requires R&S FSV3-B114)
7 = Aux. Port (requires option R&S FSV3-B5)
8 = Aux. Control connector (requires option R&S FSV3-B5)
9 = Trigger 3 (output) connector (requires option R&S FSV3-B5)
10 = Video output connector (requires option R&S FSV3-B5)
11 = IF output connector (requires option R&S FSV3-B5)
12 = Port 1 connector
13 = LAN 2 (10GBase-T) connector (requires option R&S FSV3-B6)
14 = reserved for future use
Rear Panel View