Rohde & Schwarz FSVA3000 - Frequency and Span Information in Diagram Footer; Instrument and Status Information

Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
88Getting Started 1330.8073.02 ─ 03
X-value X-value of the marker
Y-value Y-value of the marker
Func Activated marker or measurement function
Func .Result Result of the active marker or measurement function
The functions are indicated with the following abbreviations:
FXD Fixed reference marker
PHNoise Phase noise measurement
CNT Signal count
TRK Signal tracking
NOIse Noise measurement
MDepth AM modulation depth
TOI Third order intercept measurement
7.1.4 Frequency and Span Information in Diagram Footer
The information in the diagram footer (beneath the diagram) depends on the cur-
rent application, measurement, and result display.
For a default measurement in the Spectrum mode, the Diagram result display
contains the following information, for example:
Label Information
CF Center frequency
Span Frequency span (frequency domain display)
ms/ Time per division (time domain display)
Pts Number of sweep points or (rounded) number of currently displayed points
in zoom mode
7.1.5 Instrument and Status Information
Global instrument settings and functions (such as LXI configuration mode), the
instrument status and any irregularities are indicated in the status bar beneath the
diagram.
Understanding the Display Information