Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
82Getting Started 1330.8073.02 ─ 03
● Channel Bar.................................................................................................... 82
● Window Title Bar............................................................................................. 86
● Marker Information.......................................................................................... 87
● Frequency and Span Information in Diagram Footer...................................... 88
● Instrument and Status Information.................................................................. 88
● Error Information............................................................................................. 89
7.1.1 Channel Bar
Using the R&S FSV/A you can handle several different measurement tasks
(channels) at the same time (although they can only be performed asynchro-
nously). For each channel, a separate tab is displayed on the screen. To switch
from one channel display to another, simply select the corresponding tab.
If many tabs are displayed, select the tab selection list icon at the right end of the
channel bar. Select the channel you want to switch to from the list.
MultiView tab
An additional tab labeled "MultiView" provides an overview of all active channels
at a glance. In the "MultiView" tab, each individual window contains its own chan-
nel bar with an additional button. Tap this button, or double-tap in any window, to
switch to the corresponding channel display quickly.
Understanding the Display Information
To Next Page
Loading...
