Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
108Getting Started 1330.8073.02 ─ 03
Figure 7-7: Moving a window in SmartGrid mode
The brown area indicates the possible "drop area" for the window, i.e. the area in
which the window can be placed. A blue area indicates the (approximate) layout
of the window as it would be if the icon were dropped at the current position. The
frames indicate the possible destinations of the new window with respect to the
existing windows: above/below, right/left or replacement (as illustrated in Fig-
ure 7-8). If an existing window would be replaced, the drop area is highlighted in a
darker color shade.
Positioning the window
The screen can be divided into up to four rows. Each row can be split into up to
four columns, where each row can have a different number of columns. However,
rows always span the entire width of the screen and may not be interrupted by a
column. A single row is available as the drop area for the window in the Smart-
Grid. The row can be split into columns, or a new row can be inserted above or
below the existing row (if the maximum of 4 has not yet been reached).
Displaying Results
To Next Page
Loading...
