Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
32Getting Started 1330.8073.02 ─ 03
If you have entered an invalid IP address or subnet mask, the message "out of
range" is displayed in the status line. If the settings are correct, the configura-
tion is saved, and you are prompted to restart the instrument.
8. Confirm the displayed message ("Yes" button) to restart the instrument.
Using a DNS server to determine the IP address
If a DNS server is configured on the R&S FSV/A, the server can determine the
current IP address for the connection using the permanent computer name.
1. Obtain the name of your DNS domain and the IP addresses of the DNS and
WINS servers on your network.
2. Press the "Windows" key on the external keyboard or the [CTRL + ESC] key
combination on your keyboard to access the operating system.
3. Select "Start > Settings > Network & Internet > Ethernet > Network and Shar-
ing Center > Connections: Ethernet".
4. In the "Ethernet Status" dialog box, select the "Properties" button.
The items used by the LAN connection are displayed.
Setting Up a Network (LAN) Connection
To Next Page
Loading...
