Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
34Getting Started 1330.8073.02 ─ 03
Each instrument is delivered with an assigned computer name, but this name can
be changed.
The default instrument name is a non-case-sensitive string with the following syn-
tax:
<Type><variant>-<serial_number>
The serial number can be found on the rear panel of the instrument. It is the third
part of the device ID printed on the bar code sticker:
For example, FSV3007-123456
To change the computer name
1. Press the [Setup] key and then the "Network + Remote" softkey.
The current "Computer Name" is displayed in the "Network" tab.
2. Enter the new computer name.
3. Close the dialog box.
4.5.4 Changing the Windows Firewall Settings
A firewall protects an instrument by preventing unauthorized users from gaining
access to it through a network. Rohde & Schwarz highly recommends the use of
the firewall on your instrument. Rohde & Schwarz instruments are shipped with
the Windows firewall enabled and preconfigured in such a way that all ports and
connections for remote control are enabled.
For more details on firewall configuration, see the following Rohde & Schwarz
White Paper:
●
1EF96: Malware Protection Windows 10
Note that changing firewall settings requires administrator rights.
Setting Up a Network (LAN) Connection
To Next Page
Loading...
