Trying Out the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
64Getting Started 1330.8073.02 ─ 03
d) Drag the "Real/Imag (I/Q)" icon from the evaluation bar to the SmartGrid.
Figure 6-8: Inserting a Real/Imag diagram for I/Q analysis
e) Close the SmartGrid mode.
The "IQ Analyzer" channel displays the real and imaginary signal parts in sep-
arate windows.
To display the MultiView tab
An overview of all active channels is provided in the "MultiView" tab. This tab is
always displayed and cannot be closed.
► Tap the "MultiView" tab.
Activating Additional Measurement Channels
To Next Page
Loading...
