Trying Out the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
77Getting Started 1330.8073.02 ─ 03
Figure 6-17: Saving the instrument settings to a file
4. Tap the "Save" button.
The file MyMultiViewSetup.dfl is stored in the default directory C:/R_S/
instr/user.
To load stored instrument settings
You can restore the settings to the instrument at any time using the settings file.
1. Press the [PRESET] button to restore the default instrument settings so you
can check that the stored user settings are actually restored afterwards.
2.
Tap the "Load" icon in the toolbar.
Saving Settings
To Next Page
Loading...
