List of Figs. and Tables Chapter 3 R&S NRP-Z11/21/31/41/61/211/221
1137.7470.12 I-3.2 E-7
Figs.
F
ig. 3-1
Sending commands using the Input field .........................................................................3.1
Fig. 3-2 Sending commands using command files ........................................................................3.2
Fig. 3-3 Dialog window for loading an s-parameter table...............................................................3.9
Fig. 3-4 Dialog window for loading the backup file of a calibration data set ................................3.10
Fig. 3-5 Subsequently changing the default behaviour of the s-parameter correction ................3.11
Tables
T
able 3-1
Buttons assigned to the Input field...................................................................................3.2
Table 3-2 Buttons assigned to the Command File field...................................................................3.2
Table 3-3 Buttons assigned to the Output field................................................................................3.3
Table 3-4 Uncertainties of the s-parameter test system (example) ..................................................3.7
Table 3-5 Interpolated uncertainties of measurement frequencies for s-parameters (example) ......3.7
To Next Page
Loading...
