Figures and List of Tables Chapter 6 R&S NRP-Z11/21/31/211/221
1137.7470.12 I-6.3 E-6
Figs.
F
ig. 6-1
Effect of SENSe:POWer:BURSt:DTOLerance ...............................................................6.14
Fig. 6-2 Correction of interactions between the power sensor and the signal source .................6.16
Fig. 6-3 Correction of interactions between the power sensor,
the signal source, and the s-parameter device...............................................................6.16
Fig. 6-4 Effect of SENSe:TIMing:EXCLude:STARt and :STOP in the Burst Average mode .......6.18
Fig. 6-5 Effect of SENSe:TIMing:EXCLude:STARt and :STOP in the Timeslot Average mode..6.18
Tables
T
able 6-1
Commands of the CALibration system .............................................................................6.3
Table 6-2 Commands of the SENSe system ....................................................................................6.5
Table 6-3 Measurement modes ......................................................................................................6.11
Table 6-4 Commands of the SYSTem system................................................................................6.21
Table 6-5 Meaning of Item in the SYSTem:INFO? command ........................................................6.21
Table 6-6 Commands of the TEST system.....................................................................................6.25
Table 6-7 Commands of the TRIGger system ................................................................................6.26
Table 6-8 List of remote-control commands....................................................................................6.31
To Next Page
Loading...
