Rohde & Schwarz R&S NRP-Z91 - Page 44

R&S NRP-Z91 Program module "Terminal"
1168.8579.12 3.5 E-1
Options Protocol Mode
In this mode, a time stamp is added to
each response block.
H
ex Mode
In this mode, the response blocks
from the sensor are displayed in
hexadecimal format.
Auto Delete With this option active, the Output
field is automatically cleared when the
Send button is pressed.
Auto Scroll
With this option active, older items in
the Output
field are automatically
shifted upward and off the display if
space is required for new values.
LF at EOT
With this option active, a line feed is
appended to each response block
from the sensor.
Delete on Start With this option active, the Output
field is automatically cleared when the
Terminal module is started.
Send as Hex
With this option active, the text in the
Input
field is interpreted as a
hexadecimal character sequence.
Advanced … Opens a dialog window where the buffer size for the Output
field can
be set.
Help Contents
Opens the table of contents for the online help.
About
Displays information about the program version, etc.