Remote Control - Commands R&S NRP-Z91
1168.8579.12 6.24 E-3
Command Parameter Unit Default setting Page
SENSe:CORRection:OFFSet:STATe[?] OFF | ON OFF 6.9
SENSe:CORRection:SPDevice:STATe[?] OFF | ON OFF (can be
modified by the user)
6.9
SENSe:FREQuency[?] 9.0e3 to 6.0e9 Hz 50.0e6 6.9
SENSe:FUNCtion[?] "POWer:AVG" "POWer:AVG" 6.10
SENSe:POWer:AVG:APERture[?] 10.0e–6 to 0.3 s 0.02 6.10
SENSe:POWer:AVG:BUFFer:SIZE[?] 1 to 1024 1 6.10
SENSe:POWer:AVG:BUFFer:STATe[?] OFF | ON OFF 6.11
SENSe:POWer:AVG:SMOothing:STATe[?] OFF | ON OFF 6.11
SENSe:RANGe[?] 0 to 2 2 6.11
SENSe:RANGe:AUTO[?] OFF | ON ON 6.12
SENSe:RANGe:CLEVel[?] –20.0 to 0.0 dB 0.0 6.12
SENSe:SGAMma:CORRection:STATe[?] OFF | ON OFF 6.12
SENSe:SGAMma:MAGNitude[?] 0.0 to 1.0 0.0 6.13
SENSe:SGAMma:PHASe[?] –360.0 to 360.0 degree 0.0 6.13
SYSTem Commands
SYSTem:INFO? [Item] 6.14
SYSTem:INITialize 6.15
SYSTem:MINPower? W 6.16
SYSTem:RUTime 0.0 to 10.0 s 0.1 6.16
SYSTem:SUTime 0.0 to 10.0 s 0.0001 6.16
SYSTem:TRANsaction:BEGin 6.16
SYSTem:TRANsaction:END 6.16
Test Commands
TEST:SENSor? 6.17
Triggersystem Commands
ABORt 6.18
INITiate:CONTinuous[?] OFF | ON OFF 6.18
To Next Page
Loading...
